thin film, rectangular, resistor chips www.vishay.com for technical questions, contac t: filmresistors.thinfilmchip@vishay.com document number: 20028 202 revision: 08-jan-09 m10, m11, m12, m25 vishay draloric not for new designs, alternatively please use tnpw e3 features ? metal film layer on high quality ceramic ? protective top coat ? pure tin on nickel barrier layer ? low temperature coefficient and tight tolerances ? 56 days at 40 c and 93 % relative humidity down to 0.2 % notes: ? power rating depends on the max. temperature at the solder point, the component placement density and the substrate material ? marking: 4 digits, m10 - no marking notes: (1) measuring conditions in acc. with en 140 401-801 (2) rated voltage: rohs compliant standard electrical specifications model size power rating p 70 c limiting element voltage max. v ? temperature coefficient ppm/k tolerance % resistance range e-series inch metric en 140 401-801 eia 575 m10 0402 1005 0.063 0.063 25 25 0.5; 1 10r - 20k 24 - 96 50 0.5 10r - 20k m11 0603 1608 0.1 0.063 75 25 0.1; 0.25; 0.5; 1 10r - 56k 24 - 96 50 0.1; 0.25; 0.5; 10r - 56k m12 0805 2012 0.125 0.1 150 25 0.1; 0.25; 0.5; 1 10r - 100k 24 - 96 50 0.1; 0.25; 0.5; 10r - 100k m25 1206 3216 0.25 0.125 200 25 0.1; 0.25; 0.5; 1 10r - 220k 24 - 96 50 0.1; 0.25; 0.5; 10r - 220k technical specifications parameter unit m10 m11 m12 m25 rated dissipation at 70 c (en 140 401-801| eia 575) w 0.063 0.1 0.063 0.125 0.1 0.25 0.125 limiting element voltage (2) v ? 25 75 150 200 insulation voltage (1 min) v dc/ac peak > 50 > 100 > 200 > 300 thermal resistance (1) k/w 870 (1) - 550 (1) - 440 (1) - 220 (1) - insulation resistance > 10 9 category temperature range c - 55 to + 125 (+ 155) failure rate h -1 0.3 x 10 - 9 weight/1000 pieces g 0.65 2 5.5 10 p x r
document number: 20028 for technical questions, c ontact: filmresistors.thinfilmchip@vishay.com www.vishay.com revision: 08-jan-09 203 m10, m11, m12, m25 thin film, rectangul ar, resistor chips vishay draloric not for new designs, alternatively please use tnpw e3 dimensions notes: (1) please refer to table packaging, page 146 (2) products can be ordered using either t he product description or the part number size dimensions [ in millimeters] inch metric l w h t1 t2 0402 1005 1.0 0.05 0.5 0.05 0.35 0.05 0.25 0.1 0.2 0.1 0603 1608 1.55 0.85 0.1 0.45 0.05 0.30 0.2 0.3 0.2 0805 2012 2.0 1.25 0.15 0.45 0.05 0.30 0.3 0.2 1206 3216 3.2 1.6 0.15 0.55 0.05 0.45 0.2 0.4 0.2 solder pad dimensions [in millimeters] size reflow wave soldering inch metric a b l a b l 0402 1005 0.4 0.6 0.5 0603 1608 0.5 0.9 1.0 0.9 0.9 1.0 0805 2012 0.7 1.4 1.2 0.9 1.3 1.3 1206 3216 0.9 1.7 2.0 1.1 1.7 2.3 part number and product description part numbering: m1004020d5620dp000 model/size special character tcr value tolerance pac k ag i n g (1) special m100402 m110603 m120805 m251206 0 = neutral d = 25 ppm/k c = 50 ppm/k 3 digit value 1 digit multiplier multiplier 8 = *10 - 2 9 = *10 - 1 0 = *10 0 1 = *10 1 2 = *10 2 3 = *10 3 b = 0.1 % c = 0.25 % d = 0.5 % f = 1 % p0 p1 p5 pn pz up to 2 digits 00 = standard product description: m10 25 562r 0.5 % p0 m10 25 562r 0.5 % p0 model tcr resistance value tolerance pac k ag i n g (1) m10 m11 m12 m25 25 ppm/k 50 ppm/k 49k9 = 49.9 k 5r1 = 5.1 0.1 % 0.25 % 0.5 % 1 % p0 p1 p5 pn pz + 0.10 - 0.05 + 0.20 - 0.10 + 0.10 - 0.20 + 0.20 - 0.10 m 0 1 0 0 4 0 2 0 d 5 6 2 0 d p 0 0
www.vishay.com for technical questions, contac t: filmresistors.thinfilmchip@vishay.com document number: 20028 204 revision: 08-jan-09 m10, m11, m12, m25 vishay draloric thin film, rectangular , resistor chips not for new designs, alternatively pl ease use tnpw e3 note: (1) for tcr 25 ppm/k and tolerance 0.1 % only packaging model reel tape width diameter pieces/reel packing code paper m10 8 mm 180 mm/7" 330 mm/13" 10 000 50 000 p0 pz m11 m12 m25 8 mm 180 mm/7" 180 mm/7" 330 mm/13" 1000 (1) 5000 20 000 p1 p5 pn temperature rise 90 8 0 70 60 50 40 30 20 10 0 0 0.1 0.2 0.3 0.4 0.5 power in w 0402 1206 0 8 05 0603 temperature in rise in c deratin g 120 100 8 0 60 40 20 0 - 55 -25 0 25 50 75 100 125 150 175 ambient temperature in c 70 rated power i n % 120 11 0 100 90 8 0 70 60 10 100 1k 10k 100k non-linearity non-li neari ty a 3 in db resistance value in w m1 0 m2 5 m1 2 m1 1 3 2 1 current noise current noi se in v/v resistance value in w 0.5 0.3 0.1 0.01 0.03 0.05 100 1k 10k 100k 1m m10 m11 m12 m25
document number: 20028 for technical questions, c ontact: filmresistors.thinfilmchip@vishay.com www.vishay.com revision: 08-jan-09 205 m10, m11, m12, m25 thin film, rectangul ar, resistor chips vishay draloric not for new designs, alternatively please use tnpw e3 60 40 20 0 - 20 - 40 - 60 - 8 0 hf performance s a h pe an g l e n i ? frequency f in mhz 2 5 10 50 100 500 1000 10k 4.75k 1k 100 10 m11 60 40 20 0 - 20 - 40 - 60 - 8 0 hf performance 2 5 10 50 100 500 1000 o r - ] z [ n i % o r 10 100 100 100 100 100 1k 4.75k 10k m11 60 40 20 0 - 20 - 40 - 60 - 8 0 2 5 10 50 100 500 1000 m12 10 100 1k 10k 60 40 20 0 - 20 - 40 - 60 - 8 0 2 5 10 50 100 500 1000 10 100 1k m12 10k 1k 100 10 sin g le-pulse hi g h volta g e overload test 1.2/50 s en140000 4.27 test volta g e in v resistance value in 10r 100r 1k 10k 100k 3k m12 m11 1k 100 10 10r 100r 1k 10k 100k 3k m12 m11 frequency f in mhz hf performance s a h pe an g l e n i ? frequency f in mhz hf performance o r - ] z [ n i % o r frequency f in mhz sin g le-pulse hi g h volta g e overload test 10/700 s en140000 4.27 resistance value in test volta g e in v
www.vishay.com for technical questions, contac t: filmresistors.thinfilmchip@vishay.com document number: 20028 206 revision: 08-jan-09 m10, m11, m12, m25 vishay draloric thin film, rectangular , resistor chips not for new designs, alternatively pl ease use tnpw e3 assembly the suitability of conformal coatings, if appl ied, shall be qualified by appropriate m eans to ensure the long-term stability of the whole system. 10 1 0.1 10 -5 10 -4 10 -3 10 -2 10 -1 110 100 0.01 pulse ratin g p 0 secondary conditions: a) p 0 (peak pulse, sin g le pulse) b) ? u 70 c c) u max see dia g ram (max pulse volta g e) m25 m10 m12 m11 power ratin g p in w square pulse t i in s 1 0.1 10 -5 10 -4 10 -3 10 -2 10 -1 110 0.01 pulse ratin g p p 70 10 100 secondary conditions: a) p p70 (permissible constant power at ? u = 70 c) b) ? u 70 c c) u max see dia g ram (max pulse volta g e) m10 m11 m12 m25 power ratin g p in w square pulse t i in s square pulse t i in s 10 -5 10 -4 10 -3 10 -2 10 -1 110 maximum pulse volta g e 1000 pulse volta g e max in v 8 00 600 400 200 0 m25 m12 m11 m10 secondary conditions: a) p see dia g ram (pulse ratin g ) b) ? u 70 c
document number: 20028 for technical questions, c ontact: filmresistors.thinfilmchip@vishay.com www.vishay.com revision: 08-jan-09 207 m10, m11, m12, m25 thin film, rectangul ar, resistor chips vishay draloric not for new designs, alternatively please use tnpw e3 performance test conditions of test test results tolerances 0.1 %/ 0.25 % 0.5 %/ 1.0 % endurance test at 70 c iec 60115-1 4.25.1 1000 h at 70 c, 1.5 h ?on?, 0.5 h ?off? 0.2 % 0.5 % endurance at uct iec 60115-1 4.25.3 1000 h at 125 c without load 0.2 % 0.5 % overload test iec 60115-1 4.13 short time overload for 2 s 2.5 x rated voltage or 2 x limiting element voltage 0.05 % 0.1 % thermal shock iec 60115-1 4.19, iec 60068-2-14 rapid change between upper and lower category temperature 0.05 % 0.1 % damp heat steady state iec 60115-1 4.24, iec 60068-2-3 56 days at 40 c and 93 % relative humidity 0.2 % 0.5 % resistance to soldering heat iec 60115-1 4.18, iec 60068-2-20 10 s at 260 c solder bath temperature 0.05 % 0.2 % applicable specifications ? cecc40000/40400/40401-801 ? en140400/iec 60115 - 1/en 140 401-801
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
